Die making for aluminium profile extrusion. Share your section drawing, alloy, press details and requirement; we will review the profile and advise the suitable die arrangement.
We make new extrusion dies and rework running dies for aluminium profile manufacturers.
AMIT ENGINEERING works on the tooling that shapes aluminium profiles. Our scope includes solid dies, hollow/porthole dies, semi-hollow dies, die sets and corrective rework for production tooling.
A workable die starts with the actual profile: circumscribed circle, wall thickness, alloy, press container size and extrusion requirement. We use these inputs to determine die type, bearing approach and the required supporting tooling.
Email the workshop
AE / DETAIL 01
Extrusion die — profile-specific tooling
Profile review, die layout and machining planning based on the section drawing and extrusion requirement.
Tooling for open sections, enclosed hollow sections and profiles with critical tongues or narrow gaps.
Bearing adjustment and die correction based on profile output and feedback from the extrusion press.
Assessment, machining and correction work to help bring existing production tooling back into service.
The die type follows the profile geometry. We help identify the suitable approach before machining starts.
For open sections without enclosed voids, such as flats, angles, channels and simple structural profiles. The opening and bearing arrangement are developed around the profile geometry and required metal flow.
For tubes and profiles with enclosed voids. The tooling uses ports, bridges and a mandrel to form the internal shape before the profile exits through the die bearing.
For profiles with a partially enclosed area, such as channels with a narrow opening. The die layout must protect critical tongues while controlling flow around the section.
Die development for a customer-specific section drawing. We review profile geometry, circumscribed circle, wall thickness, alloy and press information before finalising the tooling approach.
Supporting parts for the extrusion die assembly, including backers, bolsters, sub-bolsters, rings, caps and other profile-specific components as required.
Rework for production dies that need correction or restoration. Scope can include bearing correction, pocket modification, re-machining and other work after inspection of the die condition.
A clear technical handover reduces correction time. The process begins with the profile drawing and ends with feedback from the extrusion press.
Review the section drawing, circumscribed circle, wall thickness, alloy, press/container information and intended use. Establish whether the section requires a solid, hollow or semi-hollow die.
Plan the die opening, bearing approach and supporting tooling. For hollow profiles, this includes the port, bridge, mandrel and welding-chamber arrangement.
Machine the die and required components according to the approved drawing and tooling design. The work may include CNC milling, wire EDM, grinding and finishing operations.
Prepare the die and associated tooling for the customer’s production process. Any material, heat-treatment or surface-treatment requirement should be agreed before manufacture.
Use trial output and press feedback to identify flow or dimensional issues. Bearing correction and related changes are made where required to improve the produced profile.
Confirm the agreed die and component dimensions, then prepare the tooling for dispatch. Keep the die reference and trial feedback available for any future correction or rework.
Send the profile drawing, alloy, press/container size, billet size if available, and whether this is a new die or correction requirement.
The end application changes the profile geometry. We work from the section drawing rather than assuming a standard die solution.
Window, door, curtain-wall and façade sections. These often require multiple chambers, thin webs, drainage features and accurate visible surfaces.
T-slots, machine frames, conveyors, guards, heat sinks and equipment sections. Die selection follows the section geometry and production requirement.
Solar-module frames, LED housings, busbar covers, electrical enclosures and heat-dissipation profiles with repeatable section features.
Body-building, railings, ladders, partition systems and fabricated sections where profile dimensions must suit downstream cutting, machining and assembly.
Cabinet frames, partitions, trims, channels, handles and modular fittings made from open or hollow aluminium profiles.
A die is developed around your drawing, whether it is a one-off special section, an existing profile that needs a replacement die, or a revised version of a running profile.
OUR APPROACH
Every die starts with the cross-section geometry, wall thickness, alloy and end-use application. The die design follows — engineered for consistent metal flow and long die life.
Examples of extrusion die faces, die assemblies and profile-related tooling.
PORTHOLE DIE
SOLID DIE
PROFILE
HOLLOW DIE
DIE SET
MANDREL
TOOL STACK
ARCHITECTURAL
BEARING LAND
DIE ASSEMBLY
The checks that matter depend on the profile and job scope. These are the key points to review before a die enters production.
A direct working relationship for new dies, running-profile corrections and replacement tooling.
For a useful die enquiry, send the section drawing and the production information you have. Existing die numbers, trial samples and press feedback are especially useful for correction jobs.
Request a Quote
The die solution is selected from the section geometry and extrusion requirement, not from a generic catalogue.
Die faces and supporting tooling for new profile development or replacement of production tooling.
Correction work based on what the press and profile sample show, including bearing-related adjustments where appropriate.
Keep die references and feedback on record to make repeat jobs, rework and replacement discussions clearer.
Send the section drawing and available production details to Ankit Kushwaha, Managing Director. For correction work, include the existing die reference, profile sample and press feedback if available.